Solid | Yes |
---|---|
Head Size | 10mm |
Base Shank Size | 3.6mm |
Average Weight | 8.0g |
Rolex 18kt Gold Ring
Rings
The average ring size varies between 52-54 for women and 60-62 for men. If you are not sure about your ring size, don't worry! We here at Ray's Jewellery will gladly resize your ring one time free of charge within 30 days of delivery.
Find Your Size

Ring Finger Sizer
€5.00
The most accurate way of finding your finger's ring size. Order for only €5 and receive a 5% discount on your next ring purchase.
Tips for measuring your finger size
Temperature causes an inaccurate reading while measuring your ring size. Your fingers will be at least half a size smaller when your hand is too cold while it will be half a size bigger when it is too hot. Measure your finger in average temperatures, preferably at the end of the day when your fingers are at their largest.
The wider band a ring has, the tighter you will feel. So, if you wish to order a band approximately 6 mm wide or more , move up a size from the normal ring size worn. Also, the rings with large stones may cause the band to lift up when laid on its side. Keep in mind that you should order the next size up since it slightly distorts the size.
If your knuckle is larger than the base of your finger, measure both your knuckle and the base of your finger and select the size in between two.
Your ring should fit enough not to fall off and loose enough to slide over your knuckle. If you hesitate between two sizes, always go with the larger one.
Repeat measurement 2 to 3 times to eliminate an erroneous result.
Necklaces
Option A

Bracelets

Measuring Tape - With your palm open and facing up, wrap the measuring tape around your wrist, just above your wrist bone. Note down measurement of your wrist size.
String Piece - With your palm open and facing up, wrap the string or strip of paper around your wrist, just above your wrist bone. Mark where the ends meet with a pen or a marker. Next, lay the string or piece of paper flat and measure it to where you've made the mark to find your wrist size and note it down.
Fitting Style | Add cm(s) to wrist size |
---|---|
Snug Fit | Add 0.6cm to 1.3cm |
Comfort Fit | Add 2.0cm to 2.5cm |
Loose Fit | Add 3.2cm |
Using the wrist measurement you've just found, compare your fit to the dimensions of the product in the product page.
Bangles

Option A
Already have a bangle - Using a ruler, just measure the diameter of the inside of your bangle and compare it to the diameter of the product in the dimensions section of the product page.
Option B
Step 1 - Cut a thin and long strip of paper (around 1 cm) wide or use a measuring tape.
Step 2 - Bring your thumb and little finger together and wrap the paper or measuring tape where hand is the widest. Point A to Point B, (See image at the side).
Step 3 - If you are using a plain strip of paper, mark your size with a pen or pencil then use a ruler to measure the length.
Step 4 - Flatten out the thin strip of paper and use a ruler to measure the distance from the end of the string or paper to the mark you made.
Step 5 - Compare the measurement taken to the diameter of the product in the dimensions section of the product page.
Information
Specifications
Guides
Social Media
Disclaimer
Help
Delivery & Returns
Information
Description
From the Rolex Style collection order 18kt yellow gold Rolex Style ring right here.
This ring is designed in an all yellow gold band and shank, with six cubic zircon stones hand set at the head of the ring. This ring is suited for women and men with less robust fingers.
If the ring in your size is not currently in stock all is not lost as this ring is locally crafted and one brand new one can be tailor made for you within two weeks! Please check the 'Guides' section in the tabs above to find your size.
Items will be shipped or can be picked up the day after scheduled completion, work for orders placed after 16:00 (4:00pm) CET will commence the day after.
360° View
Specifications
Ring Details
Material
Stone Quality | AAAAA Zirconia |
---|---|
Stone Colour | Crystal |
Stone Cut | Round |

Metal Type | 18kt Yellow Gold |
---|---|
Electroplating | None |

General Information
Gender | Unisex |
---|---|
Ring Style | Rolex |
Ring Size | Customized |
Authenticity Card | Yes |
Gift Box | Yes |
Guides
Purchase Ring Finger Sizer
For a more accurate measurement, you may purchase this set of Ring Finger Sizer for just €5.00. By purchasing this item you will receive a 5% discount code, which may be used when purchasing your ring. You may order your Ring Finger Sizer here.

DIY (Do It Yourself)
Step 1
First grab a piece of paper and cut a strip of around 70mm (3 inches), if needed cut a longer strip.

Step 2
Grab the strip of paper, wrap it around the finger you wish to wear your ring on and mark the point on the paper where it overlaps forming a circle.

Step 3
Place the strip of paper next to a ruler and measure the length from the start of the paper to the marked line.

Step 4
Finally, when you have measured your strip of paper you may compare your measurement to our ring size guide above and place your order.

Social Media
Disclaimer
Warranty
This product does not have a warranty, damages reported will be investigated on a case by case basis.
Monitor/Lighting Settings
Product colour may slightly vary due to photographic lighting sources or your monitor settings.
Shipping Days
Shipping days are are calculated on working days, weekends & public holidays are not included.
Design
Each product piece is partially hand made so there will be very slight variations in some cases.
Help
Reference Number
When contacting us please refer to us this product as: RROL01
Contact Us
Contact information available here.
Information
Specifications
Guides
Social Media
Disclaimer
Help
Delivery & Returns
Information
Description
From the Rolex Style collection order 18kt yellow gold Rolex Style ring right here.
This ring is designed in an all yellow gold band and shank, with six cubic zircon stones hand set at the head of the ring. This ring is suited for women and men with less robust fingers.
If the ring in your size is not currently in stock all is not lost as this ring is locally crafted and one brand new one can be tailor made for you within two weeks! Please check the 'Guides' section in the tabs above to find your size.
Items will be shipped or can be picked up the day after scheduled completion, work for orders placed after 16:00 (4:00pm) CET will commence the day after.
360° View
Specifications
Ring Details
Solid | Yes |
---|---|
Head Size | 10mm |
Base Shank Size | 3.6mm |
Average Weight | 8.0g |
Material
Stone Quality | AAAAA Zirconia |
---|---|
Stone Colour | Crystal |
Stone Cut | Round |

Metal Type | 18kt Yellow Gold |
---|---|
Electroplating | None |

General Information
Gender | Unisex |
---|---|
Ring Style | Rolex |
Ring Size | Customized |
Authenticity Card | Yes |
Gift Box | Yes |
General Information
Gender | Unisex |
---|---|
Ring Style | Rolex |
Ring Size | Customized |
Authenticity Card | Yes |
Gift Box | Yes |
Guides
Purchase Ring Finger Sizer
For a more accurate measurement, you may purchase this set of Ring Finger Sizer for just €5.00. By purchasing this item you will receive a 5% discount code, which may be used when purchasing your ring. You may order your Ring Finger Sizer here.

How to check your ring size
Step 1
First grab a piece of paper and cut a strip of around 70mm (3 inches), if needed cut a longer strip.

Step 2
Grab the strip of paper, wrap it around the finger you wish to wear your ring on and mark the point on the paper where it overlaps forming a circle.

Step 3
Place the strip of paper next to a ruler and measure the length from the start of the paper to the marked line.

Step 4
Finally, when you have measured your strip of paper you may compare your measurement to our ring size guide above and place your order.

Social Media
Disclaimer
Warranty
This product does not have a warranty, damages reported will be investigated on a case by case basis.
Monitor/Lighting Settings
Product colour may slightly vary due to photographic lighting sources or your monitor settings.
Shipping Days
Shipping days are are calculated on working days, weekends & public holidays are not included.
Design
Each product piece is partially hand made so there will be very slight variations in some cases.
Help
Reference Number
When contacting us please refer to us this product as: RROL01
Contact Us
Contact information available here.